It can be used on any flat touch surface, water bottles, doors, computers, deskhs, bathrooms etc

No, CopperDisinfector works with most types of surfaces. What’s more:

● CopperDisinfector needs no downtime for installation.
● CopperDisinfector last for years.
● CopperDisinfector is replaceable, if damaged.

CopperDisinfector is designed as a D.I.Y. product.

If you want a mostly-wrinkle free and long-lasting installation, we recommend a trained installer. CopperDisinfector is flexible and a handyman can install it easily with a little practice. Refer to our Installer’s Guide and Videos for details. Alternatively, you can schedule an installer’s service when you purchase the product.

Yes. The adhesive is waterproof, once installed. Over time the surface may corrode (turn green, if not cleaned regularly) when exposed to weather, especially rain/humidity or salt air.

We do not recommend for food contact or on surfaces where food is prepared (counter tops, stove tops, grill plates). CopperDisinfector is not NSF-approved and torn bits of copper can get into the food, causing a hazard.

No. CopperDisinfector uses our proprietary copper alloys and adhesives.

No, moisture damages the adhesive and backing materials. You should ensure a completely dry and clean surface prior to installation.

Touch surfaces attract dirt and fingerprints normally. CopperDisinfector surface should be be cleaned regularly for the highest disinfection action. Use only CopperDisinfector cleaners and cleaning pads.

If the CopperDisinfector is damaged or the edges come off the surface, Replace Immediately. CopperDisinfector is metal and Exposed Edges can be Sharp.

Sure. We are currently looking for quality installers/dealers in the US and Canada. We encourage candidates who have worked as laminators or have installed window film or auto wrapping to apply.